5" (125mm) Mechanics Vice - EMV-5  Affiliate link: https://sovrn.co/ne66dks

• High quality cast iron mechanics vices capable of achieving up to 4000kg of clamping force for general metal working applications
• Strong and durable with excellent shock adsorbing properties
• Tommy bar will bend before the vice becomes over stressed
• Sliding jaw is precision milled to a high tolerance for a fast smooth operation
• Base has fixing holes for bench mounting
• Fibre grips, swivel bases and spare jaw plates are available as accessories
• Body and sliding jaw are manufactured from high quality grey cast iron with hardened steel replaceable jaw plates
• Main screw and tommy bar are made from high quality steel
• Jaw Width: 5" (125mm)
• Throat Depth: 73mm
• Jaw Opening: 136mm

Affiliate link: https://sovrn.co/ne66dks

The SP41 self-propelled petrol lawnmower is a great little lawnmower that won't break the bank! Boasting a compact 39cm cutting width and a reliable STIGA ST 120 Autochoke engine this Mountfield mower is both lightweight and easy to use - perfect for small lawns. Affiliate link  https://amzn.to/3QOYQuR

• Powered by STIGA 123cc petrol engine
• Self-propelled
• 39cm cutting width
• Rust-proof polypropylene chassis
• 5-year warranty (T&C's Apply)
• 40-litre textile grass collector

Affiliate link  https://amzn.to/3QOYQuR

I seem to spend more time confirming the correct replacement than actually fitting it. Different suppliers sometimes list slightly different information for the same OEM number, so before ordering my 197253 belt I compared the OEM references here - https://www.amazon.com/Mower-197253-Replacement-Husqvarna-Craftsman/dp/B0949K1453. Just wondering what everyone else uses these days—manufacturer's parts book, dealer lookup, or an online cross-reference?

Glad you got the drive sorted. 

I don't have the parts manual but if you find and post the the full model code I might be able to find one for you. There's so many variants.

Touching on the AI stuff. Yes it does my head in. It can be really handy if used for the right stuff and in the right way, but people use it just to create content for social media, and its mainly useless and inaccurate slop as you said.  To be honest I look at Facebook now and it's not just AI slop it's completely nonsense posts just to get a reaction and clicks.  People who comment and react don't seem to realise they are just adding fuel to the fire.

Mick
Thank you so much for help and assistance, drive restored!! Now to attack the deck reconstruction, hope Ive kept all the parts !! Thanks so much ..common sense in a world of AI slop.
Do you have the spare parts list for the cutting deck ? cheers

Tired of loud, unreliable compressors? This super‑silent 50L model delivers strong performance without the noise. Perfect for DIY, automotive, and professional use.
See more details here (affiliate link): https://sovrn.co/thy05rm

Quote from: Mick on June 07, 2026, 03:42:06 AMHi, and welcome to TGMForum.

The clicking you get from the starter on a B&S InStart is usually caused by a faulty wiring harness.  They modified them to cure this very problem. There's a few posts on here regarding this issue, and I've left a couple of example links below.

https://thegardenmachineryforum.co.uk/index.php?topic=545.0
https://thegardenmachineryforum.co.uk/index.php?topic=926.0

Regarding the cable issue, I'm not very familiar with this actual machine, do you have a model number for it?

Hi,I'm one of the posts on here regarding the clicking on a Briggs 675is InStart. I've replaced the wiring harness and I'm still getting the clicking and engine jamming. Anyone have any other ideas or am I just missing something. Cheers [/quote]

I have a Hyundai HYM460SPE petrol lawnmower.

The linkage from the Handlebar lever to the throttle (although intact) does not seem to operate the carburettor butterfly correctly.

I need a picture(s) from someone with a working HYM460 (or HYM430 or similar) of the throttle and governor linkages/springs so I can adjust mine accordingly.

Many Thanks . . . .

Stuart

The engine is sorted. I was overthinking it. Just needed a smear of sealant on the gasket as there was air being sucked in.

As for the deck fittings, my guess at the orientation of the hanging brackets was as correct as it could be. Any re-position by even 1/2 inch in any direction would mean the grass collector would not fit.

Although the belt measured the correct OD, it had 'thinned' out sufficiently over the years such that it was seating deeper into the V pulleys than it should have, thereby giving too much slack. The new belt was noticably wider and sat less deeply in the pulleys and worked perfectly.

My efforts to shoe horn the wrong size tubes (left over from other projects) into the front (very poor condition) 12-5.00-4 tyres was a failure. The tubes were way oversize and scrunched up inside the tyre and this caused pinch points that developed pin holes. New correct tubes are on the way. Still way cheaper than new tyres.

Only problem left to overcome is that I mulch most of the time, rather than collecting the cuttings. I don't have a mulch setup for this mower. Need to bodge something together.

All told I'm into this project for about £90 - £100. now, plus loads of work. Probably not worth it for most people, and if I was paying somebody to do this, or looking for a sell-on and some profit, it would have been a non starter.

So, I've ended up with a very rusty, very old, but still fairly solid and very capable sit-on for £100 and some elbow grease, and I've leaned a lot.

Compare this with the previous sit-on I fixed up for my son.. a Mountfield 827H, again for a total cost of about £100, he definately go the better deal!

Thanks Mick, I cant find any other than a new cassette at £330, shame to scrap a good machine because greedy manufacturers demands ridiculous prices for parts.