Tool-Store

Recent Posts

Members
  • Total Members: 29
  • Latest: zaffy
Stats
  • Total Posts: 195
  • Total Topics: 69
  • Online Today: 6
  • Online Ever: 29
  • (March 23, 2017, 09:14:43 PM)
Users Online
Users: 0
Guests: 2
Total: 2
VigLink badge

Belt guardsAriens Razor BeltVariable drive systems2018-06-18 Recall: Sanli ...Makita Product Recall Show us the gardening dea...Stihl M-Tronic fuel solen...HAIX Work BootsEfco versus HusqvarnaBlack Friday DealsWeather where you are?STIHL HT-KM Pole prunerDecent midrange out-front...Just repaired my old Harr...Stihl Cordless mowersNew Hayter Harrier 41 375...

Author Topic: Briggs & Stratton Carburettor problem  (Read 695 times)

Offline guytonr

  • Newbie
  • *
  • Posts: 1
    • View Profile
Briggs & Stratton Carburettor problem
« on: November 13, 2017, 11:53:33 AM »
Good day, I am a novice mechanic and don't tend to do it very often.  I have a Westwood T1800h and due to running out of fuel, after refuelling it the engine begun to hunt due to dirt in carb.  I duly removed carb and cleaned out by removing the few screws there are, wiping and replacing them and sure enough there were bits of dirt in emulsion tube, this was the only dirt I found. As the bonnet was off I decided to remove petrol tank and clean out also. On putting back together the engine only turns over without firing, there is fuel in the fuel bowl but the plugs were not wet so I am suspecting that fuel is not getting through the carb.  Does anybody have any ideas what the issue could be??? Could it be air getting in somewhere, does it need bleeding or does the emulsion tube or other crews have to be replaced in a certain way to work? I am at a loss!  Many thanks in advance. Regards, Ross



Offline Mick

  • Administrator
  • Full Member
  • *****
  • Posts: 124
    • View Profile
    • Guitarist Guild
Re: Briggs & Stratton Carburettor problem
« Reply #1 on: November 13, 2017, 05:44:27 PM »
Hi Ross, and welcome to TGMF.

Are you sure the choke is going on properly?  Wonder if when refitting the carb you might have disturbed the choke linkage in such a way it's not going on as it should.