Quote from: Sonnym on April 15, 2024, 06:32:29 PMHi, and thanks for the reply, hopefully get a look

No problem, if you get stuck just ask and I'll talk you through it. 

Hi, and thanks for the reply, hopefully get a look

Quote from: Sonnym on April 15, 2024, 06:13:22 PMHi, I'm looking for any information on cleaning a honda fg200 carburetor.

Sonnym, I moved your original post to the correct board, and replied.  You can find it here, https://thegardenmachineryforum.co.uk/index.php?topic=865.0

Hi, I'm looking for any information on cleaning a honda fg200 carburetor.

Hi Sonnym, and welcome to TGMF.

There is various videos on the web showing how to do this, and it's probably easier than trying to explain in text. 

This video below explains how to do it, though you might not have access to a Sonic leaning tank, you should be able to clean it sufficiently without.  It will give you an idea where the jets are and how to access them.  It's basically the same type of carb you have.

How to Clean a Honda GX Carburetor

Hi, I'm looking for instructions on cleaning the carb on the fg200.
Any help please

Thanks.  So the primer button is at the front of the engine and fitted into the plastic air filter backplate?

Quote from: Mick on April 13, 2024, 05:32:21 PMHi Somerset, and welcome to TGMF.

What engine do you have on yours. Briggs and Stratton? or Tecumseh?

Hi Mike

It's a Briggs and Stratton.

Hi Somerset, and welcome to TGMF.

What engine do you have on yours. Briggs and Stratton? or Tecumseh?

Hello everyone

I've just joined the site in hope of some help.

I have a mountfield empress 16. She starts fine, but needs a few pulls from cold. The problem is I'm not drawing any fuel though when try and prime her with fuel.

I've changed the primer blub and replaced all the seals/gaskets in the carb. I'm at a loss as fuel is clearly getting thought and after a couple of big pulls she'll fire up and once started once will fire up with no problem.

Any suggestions please???