• Welcome to The Garden Machinery Forum. Please login or sign up.
 
mowers-online

Recent Posts

Members
  • Total Members: 91
  • Latest: tgl
Stats
  • Total Posts: 784
  • Total Topics: 242
  • Online Today: 10
  • Online Ever: 275
  • (January 22, 2020, 07:39:54 PM)
Users Online
Users: 0
Guests: 12
Total: 12

The importance of using correct spark plug

Started by Swissqp, February 01, 2021, 04:45:46 PM

Previous topic - Next topic

Swissqp

February 01, 2021, 04:45:46 PM Last Edit: February 01, 2021, 10:55:17 PM by Swissqp
So I've restored this 35 year old Honda HR21-5 and replace the damaged crank (oil leak due to multiple gouges in the shaft right where the seal sits). Sonic cleaned the carb and stripped it down, resprayed with OEM paint, etc. She started first pull after rebuild. Gotta love Hondas

But in typical fashion and before I get too big for my boots, i have to admit she hunted and surged a little bit. It happened when I took the revs down but calmed down when i got to idle. If I then slowly added thottle it was fine.

I first thought the fuel/air mixture was lean so I fettled with the pilot jet screw and set it to spec (all the way in and back it off 1 and 3/4 turns). This is not a two minute job as to access the screw you need to undo the intake manifold. Anyway made no difference. So I took the carb off and cleaned it again. That's an hours job as the fuel tank has to come off as do all the linkages. A right pain. Anyway got it back together. Started hunting again.

So I then thought about the spark. I had put a new one on and it was gapped fine. But i noticed i had used a BMR6A rather than a BM6A.....could a resistor really make all the difference? Well the answer is yes it can and it did. The resistor is for non-CDI models with points and condenser. Apparently the spark is less powerful.

So it just goes to show always use the exact spark plug!