HRH536 QX

[Swissqp]

Bought this lovely 2015 HRH roller for £250 for use in my own garden. It was used by a home owner but wasn't cared for (check out the blade!!!)  Roller was seized and was pilot jet in carb. Stripped down roller (bearings seized) so went in and replace dog clutch, spline bearings and all the oil seals as they were all leaking (including the one that goes to PTO shaft). Actually the transmission housing on both sides needed to be replaced - it had been sand blasted to the point that the oil seals were proud of the housing. Worst job was replacing  the governor shaft oil seal which was difficult to remove - it was leaking badly. Clearly the seals had perished through lack of use. Major service done with rotostop/blade clutch bearing swapped out. Anyway she's finally back together and working well.

[Mick]

Nice machine, not cheapest to repair, but you ended up with a really good mower.

They certainly got their moneys worth out of that old blade. lol..

[Swissqp]

Great mower...